Beginner Level - Suited for a wide range of uses, these products are simple to operate and set up. Some initial assembly may be required depending on the type of product. Optical instruments with this rating will have very good optical and mechanical quality. Great for families, young people, and folks who don't want to mess with equipment and complexity. Beginning level telescopes will show you countless lunar craters, Saturn's rings and a myriad of star clusters and nebulae! Referring to the manual is recommended.

Intermediate Level - These products offer higher performance and more advanced features than Level 1: Beginner models. They typically take a bit longer to learn and need some set-up or adjustments. But anyone with the slightest technical bent will have no problem getting familiar with these models. Referring to the manual is recommended.

Advanced Level - These products provide the best performance but may require more skill to master and appreciate. Optical instruments with this rating have exceptionally fine optics and mechanics. Some are easy to use but might be on the large or heavy side. Some are intended for specialized uses. These products will appeal to the more technically inclined. Referring to the manual is highly recommended.

For telescopes, the optical diameter (also known as aperture) is the size of a telescope's main light-collecting lens or primary mirror, measured in millimeters or inches. Telescopes with larger optical diameters collect more light, which leads to an increase in brightness and image resolution compared to smaller instruments.

For binoculars, the optical diameter (also known as objective lens diameter) is the size of each of the front-facing objective lenses of a binocular measured in millimeters. Binoculars with larger objective lenses collect more light, which increases image resolution and brightness. Binoculars with larger objective lenses are recommended for low light situations, and binoculars with at least 50mm or larger objective lenses are recommended for pleasing astronomical observations at night.

The distance from the center of a curved mirror or lens at which parallel light rays converge to a single point. The focal length is an inherent specification of a mirror or lens and is one of the factors in determining resultant magnification for a telescope (along with the focal length of the eyepiece being used).

The theoretical resolving power of a telescope can be calculated with the following formula: Resolving power (in arc seconds) = 4.56 divided by aperture of telescope (in inches). In metric units, this is: Resolving power (in arc seconds) = 116 divided by aperture of telescope (in millimeters). Note that the formula is independent of the telescope type or model, and is based only upon the aperture of the telescope. So the larger the telescope's aperture, the more it is capable of resolving. This is important to keep in mind when observing astronomical objects which require high resolution for best viewing, such as planets and double stars. However, it is usually atmospheric seeing conditions (not the telescope) which limits the actual resolving power on a given night; rarely is resolution less than one arc-second possible from even the best viewing locations on Earth.

The highest practical limit is different from the often used "highest theoretical magnification" specification. The "theoretical" limit generally is 50x the aperture of the scope in inches (2x the aperture in mm). So for example, an 80mm refractor is capable of 160x, and a 10" telescope is theoretically capable of 500x magnification. But after approximately 300x, theory breaks down and real world problems take over. The atmosphere above us is constantly in motion, and it will distort the image seen through the telescope. This effect may not be noticeable at lower powers, but at higher powers the atmosphere will dramatically blur the object, reducing the quality of the image. On a good night (a night where the air above is steady and the stars aren't twinkling), the practical upper limit of a large telescope is 300x, even thought the theoretical limit may be much higher. This doesn't mean the scope will never be able to reach those higher "theoretical" powers - there will be that rare night where the atmosphere is perfectly still and the scope can be pushed past it's practical limit, but those nights will be few and far between.

The limiting stellar magnitude is a measure of the faintest star you can see through the telescope.

The astro-photographic capability of the telescope is based on the style, stability, and accuracy of the mount and tripod. Telescopes on either very lightweight mounts or non tracking mounts (such as Dobsonians) are capable of only very short exposures such as lunar photographs. If a motor drive is attached to an equatorial mount, even a small lightweight mount is capable of capturing some planetary detail. Larger EQ mounts that utilize very precise tracking and excellent stability are capable of longer exposure deep-sky photography.

Some mounts are compatible with a motorized Go-To system for fully automated computer finding of objects in the night sky. Others mounts are compatible with computer finding systems which require the user to manually move the mount to the object's position as indicated by the computer finder.