Explore Scientific 127mm Triplet ED Refractor Telescope

Best for viewing:

Brighter deep sky
Best for imaging:

Deep sky
Optical design:

Optical design

Reflector telescopes use a pair of large and small mirrors to direct incoming light to the eyepiece. Refractor telescopes refract, or "bend" incoming light to a focus by means of an objective lens. Cassegrain telescopes, such as Maksutov-Cassegrains, "fold" incoming light using two mirrors and a front "corrector" lens.

Refractor
Optical diameter:

Optical diameter

For telescopes, the optical diameter (also known as aperture) is the size of a telescope's main light-collecting lens or primary mirror, measured in millimeters or inches. Telescopes with larger optical diameters collect more light, which leads to an increase in brightness and image resolution compared to smaller instruments.

For binoculars, the optical diameter (also known as objective lens diameter) is the size of each of the front-facing objective lenses of a binocular measured in millimeters. Binoculars with larger objective lenses collect more light, which increases image resolution and brightness. Binoculars with larger objective lenses are recommended for low light situations, and binoculars with at least 50mm or larger objective lenses are recommended for pleasing astronomical observations at night.

127mm
Focal length:

Focal length

The distance from the center of a curved mirror or lens at which parallel light rays converge to a single point. The focal length is an inherent specification of a mirror or lens and is one of the factors in determining resultant magnification for a telescope (along with the focal length of the eyepiece being used).

952mm
Focal ratio:

Focal ratio

The focal ratio of an optical system is the ratio of a telescope's focal length to its aperture. Short focal ratios (f/5, f/4.5) produce wide fields of view and small image scales, while long focal lengths produce narrower fields of views and larger image scales.

f/7.5
Coatings:

Coatings

Binocular lenses and prisms are often coated with anti-reflective material to minimize light loss as light travels through the multiple optical surfaces of a typical binocular. Coatings help maximize the amount of light transmitted through each glass surface of a binocular, so as much light as possible reaches the observer's eyes to provide a bright and sharp image.
Good lenses are at least "fully coated," with a single layer of magnesium fluoride coating applied to each air-to-glass lens surface. Multiple layers of coatings are even more effective; the term "multi-coated" means one or more air-to-glass lens surface has multiple coatings. "Fully multi-coated" optics are even better, meaning all lens surfaces have multiple layers of anti-reflective coatings applied for maximum light transmission and optimal image quality.

Fully multi-coated
Glass material:

Glass material

Refractors use glass lenses to focus the light, and the glass material plays an important role in the quality of the resulting image. Standard achromatic refractors routinely use Crown and Flint for the two elements, but more expensive apochromatic refractors can use ED (extra low dispersion) glass for one or more of the lenses. Reflector mirrors are made from glass with different levels of thermal expansion. Standard mirrors are made from material such as Soda-Lime Plate glass and BK-7 glass. Glass with Pyrex or other low thermal expansion material will not change shape as dramatically during the cool-down period, resulting in more stable images during this period.

Extra low dispersion
Resolving power:

Resolving power

The theoretical resolving power of a telescope can be calculated with the following formula: Resolving power (in arc seconds) = 4.56 divided by aperture of telescope (in inches). In metric units, this is: Resolving power (in arc seconds) = 116 divided by aperture of telescope (in millimeters). Note that the formula is independent of the telescope type or model, and is based only upon the aperture of the telescope. So the larger the telescope's aperture, the more it is capable of resolving. This is important to keep in mind when observing astronomical objects which require high resolution for best viewing, such as planets and double stars. However, it is usually atmospheric seeing conditions (not the telescope) which limits the actual resolving power on a given night; rarely is resolution less than one arc-second possible from even the best viewing locations on Earth.

1.09arc*sec
Lowest useful magnification:

Lowest useful magnification

Lowest useful magnification is the power at which the exit pupil becomes 7mm in diameter. Powers below this can still be reached with the telescope to give wider fields of view, but the image no longer becomes brighter at a lower power. This is due to the fact that the exit pupil of the telescope (the beam of light exiting the eyepiece) is now larger than the average person's dark adapted pupil, and no more light can fit into the eye.

18x
Highest useful magnification:

Highest useful magnification

The highest practical limit is different from the often used "highest theoretical magnification" specification. The "theoretical" limit generally is 50x the aperture of the scope in inches (2x the aperture in mm). So for example, an 80mm refractor is capable of 160x, and a 10" telescope is theoretically capable of 500x magnification. But after approximately 300x, theory breaks down and real world problems take over. The atmosphere above us is constantly in motion, and it will distort the image seen through the telescope. This effect may not be noticeable at lower powers, but at higher powers the atmosphere will dramatically blur the object, reducing the quality of the image. On a good night (a night where the air above is steady and the stars aren't twinkling), the practical upper limit of a large telescope is 300x, even thought the theoretical limit may be much higher. This doesn't mean the scope will never be able to reach those higher "theoretical" powers - there will be that rare night where the atmosphere is perfectly still and the scope can be pushed past it's practical limit, but those nights will be few and far between.

254x
Highest theoretical magnification:

254x
Limiting stellar magnitude:

Limiting stellar magnitude

The limiting stellar magnitude is a measure of the faintest star you can see through the telescope.

13.2
Mount type:

Optical Tube without Mount
Length of optical tube:

33.2 in.
Weight, optical tube:

18.0 lbs.
Additional included accessories:
Other features:
Warranty:

Warranty

This warranty gives you specific legal rights. It is not intended to remove or restrict your other legal rights under applicable local consumer law; your state or national statutory consumer rights governing the sale of consumer goods remain fully applicable.

One year

Optical design

Optical diameter

Focal length

Focal ratio

Coatings

Glass material

Resolving power

Lowest useful magnification

Highest useful magnification

Limiting stellar magnitude

Warranty